| Firmware Version |
Description |
Date |
| 3.0.5.536 |
- Replace the Active-X client with a Java Client for compatibility with new browsers.
- Improved KVM over IP video performance .
- Added two new video modes: (high resolution-no compression & high color-medium compression).
- Added support for port forwarding for the new Java Client.
- Improved the full screen mode.
All user settings, except network configuration, will be erased after firmware upgrade.
Instructions how to upgrade the device can be found here: mtu201108 |
2011-09-1 |
| 3.0.5.175 |
- Improved video over IP performance.
- Fixed Firefox v3.6 plugin bug.
- Fixed SSL certificate installation under Windows 7.
- Fixed Bug with AccessIT / KVM.net Auto Discovery.
- Removed low cipher.
- Improved the network Auto negotiation.
- Added the ‘unassign’ feature for AccessIT.
All user settings, except network configuration, will be erased after firmware upgrade. |
2010-05-27 |
| 3.0.5.75 |
- Added support for Firefox browser in Windows and Linux.
- One TCP port (900) is used for remote connection.
- New user interface.
- Shared mode for up to 5 simultaneous users.
- Exclusive mode support.
- Support for PoC units.
All user settings, except network configuration, will be erased after firmware upgrade. |
2009-11-02 |
3.0.4.8
Managed |
- Added compatibility to KVM.net II
Restore device factory settings without preserving its network parameters. This action will ensure full device compatibility with the KVM.net II system.
WARNING! Failure to restore device factory settings without preserving its network parameters may impair device functionality with the KVM.net II system. |
2008-09-25 |
3.0.2.42
Managed |
- Added Enable KVM.net option for KVM.net Management.
- Added SNMP traps
- Correction for Microsoft XML security patch issue.
- Windows Vista client support.
- Added option to configure 3 non-consecutive TCP ports.
- Default mouse setting is set to Windows 2003 Server/XP/Vista/2008 Server.
IP Control with firmware version 3.0.2.42 Not Managed can be upgraded directly to this firmware. IP Control with firmware version 3.0.1.39 and older should be upgraded to the Phase1 firmware before upgrading to this firmware.
All user settings, except network configuration, will be erased after this firmware upgrade. |
2008-02-15 |
| N/A |
- Safe Mode Upgrade.
- Changed Safe Mode IP Settings:
- If DHCP Server is present, IP Control will pick up IP address from DHCP Server.
- If DHCP Server is not present, IP Control will boot in Safe Mode with static IP: 192.168.2.155.
All user settings, except network configuration, will be erased after this firmware upgrade.
We are strongly advising to upgrade the IP Control units to the new Safe Mode.
(Applicable for IP Control units revision 1.4 or lower with firmware version 3.0.2.42 or newer.) |
2007-12-09 |
3.0.2.42
Not Managed |
- Added SNMP traps.
- Correction for Microsoft XML security patch issue.
- Windows Vista client support
- Added option to configure 3 non-consecutive TCP ports.
- Default mouse setting is set to Windows 2003 Server/XP/Vista/2008 Server.
Upgrade IP Control unit to Phase1 firmware before upgrading to this firmware.
All user settings, except network configuration, will be erased after this firmware upgrade.
Download the short movie, explaining Phase1 and Phase2 firmware upgrade procedure: Phase_One_Upgrade.exe - 9MB. |
2008-02-15 |
N/A
Phase1 |
- Phase1 firmware upgrade.
All upgrades from firmware versions 3.0.1.x to firmware version 3.0.2.x and higher will require Phase 1 upgrade before upgrading to the device specific firmware.
This firmware must be used for IP Control units prior to firmware version 3.0.2.42. First, upgrade the IP Control unit to Phase1 firmware, reboot the unit and then upgrade the unit to the latest IP Control firmware.
Download the short movie, explaining Phase1 and Phase2 firmware upgrade procedure: Phase_One_Upgrade.exe - 9MB.
If device has firmware version 3.0.0.42, upgrade it to firmware version 3.0.1.39 before performing Phase1 upgrade. |
2008-02-01 |
| 3.0.1.39 |
- Video engine stability improvements.
- Changed keyboard LED synchronization mechanism.
- SDF update.
If you are using custom SDF with Scroll Lock or Num Lock switching hotkey, please request SDF update from Minicom Technical Support.
All user settings, except network configuration, will be erased after this firmware upgrade. |
2007-05-16 |
| N/A |
- Safe Mode Upgrade.
- Changed Safe Mode IP Settings:
- If DHCP Server is present, IP Control will pick up IP address from DHCP Server.
- If DHCP Server is not present, IP Control will boot in Safe Mode with static IP: 192.168.2.155.
All user settings, except network configuration, will be erased after firmware upgrade.
We are strongly advising to upgrade the IP Control units to the new Safe Mode
(Applicable for IP Control units revision 1.4 or lower with firmware versions up to 3.0.1.39) |
2007-02-19 |
| 3.0.1.26 |
- Fix for VT100 Serial emulation.
- Support for 300 baud rate.
- Support for 5-digit TCP port
- Improved German keyboard support.
- Support for RPS power management.
- Keyboard and mouse synchronization improvements.
All user settings, except network configuration, will be erased after this firmware upgrade. |
2006-12-07
ECR 2491 |
| 3.0.0.42 |
Initial release firmware |
2006-05-31 |
Includes firmware upgrade for IP Control P/N 1SU70017, P/N 0SU70017 and IP Integration Kit P/N 0SU22080
