|
 |
|
|
KVM.net® II Upgrades and Documentation
|
|
|
|
|
|
KVM.net II Switch Definition File (SDF)
Click on SDF version number to download the Switch Definition file. Unzip it to temporary folder and upload the SDF.xml file to the KVM.net II in Settings > KVM Switches page of KVM.net II Manager.
| SDF Version |
Description |
Date |
| 10.03 |
- Compatible with Smart IP Access SDF
- Support for different DX hotkeys
- Support for 108 KVM switches and models |
2008-10-14 |
| 10.01 |
- Support for different DX hotkeys
- Added support for some Athen KVM Switches
- Addition of some third party Matrix KVM Switches
- Not compatible with Smart IP Access
- Support for 195 KVM switches and models |
2008-08-08 |
| 10.00 |
- Default SDF included with KVM.net II
- Compatible with Smart IP Access
- To revert to default SDF, restore KVM.net to factory settings
- Support for 178 KVM switches and models |
2008-01-04 |
KVM.net II Power Distribution Units (PDU) Definition File (PDF)
Note! PDUs support is available starting from KVM.net II version 2.5.
Unzip the downloaded file to temporary folder and upload the PDF_Default.xml file to the KVM.net II in Settings > Attached Devices > PDUs page of KVM.net II Manager.
| Download |
Manufacturer |
Models |
| Download |
- APC
- BlackBox
- Dell
- Eaton
- HP
- Intel
- Server Technology
|
- APC 8 Port AP9212
- APC 24 Port AP7941
- APC 8 Port AP7920
- APC Switched PDU 8 port CLI
- APC Switched PDU 16 port CLI
- APC Switched PDU 24 port CLI
- Elite Managed Power Controller 8 Port PSH8
- Elite Managed Power Controller 16 Port PSH16
- Elite Managed Power Controller 20 Port PSV20
- Rackmount Remote Power Manager 4 Port
- Rackmount Remote Power Manager 4 Port NP
- Rackmount Remote Power Manager 8 Port
- Rackmount Remote Power Manager 8 Port NP
- Rackmount Remote Power Manager 16 Port
- Rackmount Remote Power Manager 16 Port NP
- DRAC 4
- Eaton 8 Port IPV42
- Eaton 16 Port IPV70
- iLO2
- IPMI 1.5
- IPMI 2.0
- Sentry Power Tower XL 16 Port
- Sentry Switched PDU CW24+CX24 48port |
KVM.net II Serial Console Servers Definition File (CSDF)
Note! Support for Serial Console Servers is available starting from KVM.net II version 2.5.
Unzip the downloaded file to temporary folder and upload the CSDF_Default.xml file to the KVM.net II in Settings > Attached Devices > Console Servers page of KVM.net II Manager.
| Download |
Manufacturer |
Models |
| Download |
- Aten
- Avocent
- Belkin
- Digi International
- Hewlett-Packard
|
- Altusen SN0108
- Altusen SN0116
- Cyclades ACS1
- Cyclades ACS4
- Cyclades ACS8
- Cyclades ACS16
- Cyclades ACS32
- Cyclades ACS48
- F1DP116S
- Digi CM 8
- Digi CM 16
- Digi CM 32
- Digi CM 48
- HP SCS 16
- HP SCS 48 |
KVM/IP Devices Firmware Upgrades
Click on IP Device firmware version number to download the upgrade package file. Run the downloaded file on your computer. It will create Devices folder and will place the devices upgrade file in this folder. Upload the upgrade file in zip format to the KVM.net II in Settings > Firmware Upgrade page.
| IP Device Version |
Description |
Date |
| 3.0.4.9 |
Firmware for PX
- Correction of Shift and Ctrl key operation in Linux target.
- Correction of keyboard typematic functioanlity.
- Use firmware 3.0.4.8 with targets running Japanese operating systems.
Applicable to KVM.net II version 2.0 only |
2009-01-13 |
| 3.0.4.8 |
Firmware for PX, IP Control, Smart 116 IP, DXUIP II
- Initial release for KVM.net II
Applicable to KVM.net II version 2.0 only |
2008-10-12 |
KVM/IP Devices Upgrade Procedure
To upgrade the firmware version of all connected and configured KVM/IP devices from the KVM.net II system:
- Run the downloaded file. It will create a folder on the client computer with the upgrade file.
- Login to the KVM.net II Manager Web interface with administrator rights.
- From the Settings menu, click Firmware Upgrade.
- Press Browse and locate the upgrade file (In ZIP format only!).
- Press Start Upgrade button. KVM.net II loads the firmware and initiates an upgrade of the KVM/IP devices.
The firmware uploads to the KVM/IP devices. KVM/IP device status changes to Updating and then to Rebooting as the firmware finishes upgrading. The uploaded firmware is stored in the KVM.net II Manager. Every new KVM/IP device connected to the system will be automatically upgraded to this firmware.
KVM.net II Documentation Updated
- Applicable to KVM.net II version 2.5 and higher
- IPA43-2.pdf: - Accessing Raritan Dominion SX Serial Console from Centralized Access Management System.
- IPA42-2.pdf: - Adding VMware ESX and ESXi Access Service to Centralized Access Management System.
- IPA41-2.pdf: - Adding Wake-On-LAN Access Service to Centralized Access Management System to turn on or wake up the target servers.
- IPA37-2.pdf: - Accessing Lantronix SecureLinx Spider from Centralized Access Management System.
- IPA36-2.pdf: - Centralized Access Management System network ports.
- IPA35-2.pdf: - Accessing AdderLink IPEPS from Centralized Access Management System.
- IPA34-2.pdf: - Accessing Belkin OmniView Remote IP Manager F1DE101H from Centralized Access Management System.
- IPA33-2.pdf: - Accessing Tripp Lite IP Remote Access Units Model # B050-000 from Centralized Access Management System.
- IPA32-2.pdf: - Accessing Peppercon KVM/IP Devices from Centralized Access Management System.
- IPA31-3.pdf: - Adding VMware Server 2 Access Service to Centralized Access Management System.
- IPA30-3.pdf: - Accessing Minicom Legacy KVMIP Devices (Smart IP Extender, IP Link, Phantom MXIP, Smart 16 IP and DXUIP) from Centralized Access Management System.
- IPA28-3.pdf: - Adding Microsoft Virtual Server 2005 Access Service to Centralized Access Management System.
- IPA29-3.pdf: - Configuring Microsoft Virtual Server 2005 to enable VMRC Server.
- Applicable to KVM.net II version 2.0 only
- IPA43-1.pdf: - Accessing Raritan Dominion SX Serial Console from KVM.net II System.
- IPA42-1.pdf: - Adding VMware ESX and ESXi Access Service to KVM.net II System.
- IPA41-1.pdf: - Adding Wake-On-LAN Access Service to KVM.net II System to turn on or wake up the target servers.
- IPA40-1.pdf: - Connection to RDP Web Access Service doesn?t work properly in KVM.net II System.
- IPA38-1.pdf: - Accessing Belkin Serial Console Over IP F1DP116S from KVM.net II System.
- IPA37-1.pdf: - Accessing Lantronix SecureLinx Spider from KVM.net II System.
- IPA36-1.pdf: - KVM.net II System network ports.
- IPA35-1.pdf: - Accessing AdderLink IPEPS from KVM.net II System.
- IPA34-1.pdf: - Accessing Belkin OmniView Remote IP Manager F1DE101H from KVM.net II System.
- IPA33-1.pdf: - Accessing Tripp Lite IP Remote Access Units Model # B050-000 from KVM.net II System.
- IPA32-1.pdf: - Accessing Peppercon KVM/IP Devices from KVM.net II System.
- IPA31-2.pdf: - Adding VMware Server 2 Access Service to KVM.net II System.
- IPA30-2.pdf: - Accessing Minicom Legacy KVM/IP Devices (Smart IP Extender, IP Link, Phantom MXIP, Smart 16 IP and DXUIP) from KVM.net II.
- IPA28-2.pdf: - Adding Microsoft Virtual Server 2005 Access Service to KVM.net II System.
- IPA29-2.pdf: - Configuring Microsoft Virtual Server 2005 to enable VMRC Server.
- KVM.net_II_UG.pdf: - KVM.net® II User Guide
- Applicable to KVM.net II version 2.0 and higher
- KVM.net_LDAP.exe: - Movie explaining how to configure the KVM.net II system to work with Microsoft Active Directory LDAP Service
- KVMIP_Operation_from_Win2k8.exe: - Movie explaining how to operate Minicom IP Gateways from Windows 2008 Server. 9 MB.
- KVMIP_Operation_from_Windows_Vista.exe: - Movie explaining how to operate Minicom IP Gateways from Windows Vista. 27MB.
- Mouse_Sync.exe: - Movie explaining how to perform mouse synchronization in Windows 2003 Server/Windows XP/Windows Vista. 18 MB.
- IPA7-1.pdf: - Operating KVM/IP Device from Windows 2003 Server SP1 or R2.
- IPA8-1.pdf: - Disabling mouse acceleration in target login screen.
- IPA24-2.pdf: - Configuring host file to remove Internet Explorer certificate warning.
KVM.net II Video Tutorials
- English - KVM.net II Video Tutorial in English language. (93 Megabytes)
- German - KVM.net II Video Tutorial in German language. (94 Megabytes)
- French - KVM.net II Video Tutorial in French language. (94 Megabytes)
- Russian - KVM.net II Video Tutorial in Russian language. (96 Megabytes)
- Japanese - KVM.net II Video Tutorial in Japanese language. (106 Megabytes)
- Polish - KVM.net II Video Tutorial in Polish language. (96 Megabytes)
- Chinese - KVM.net II Video Tutorial in Chinese language. (121 Megabytes)
KVM.net II Tools
- KVM Vision - KVM Vision Viewer 2.0.8 for operating Minicom Legacy KVM/IP devices (Smart IP Extender, IP Link, Phantom MXIP, Smart 16 IP, DXUIP).
- PuTTY - PuTTY version 0.60
|
|
|
|
|
|
 |
|
|
|
|
